Socket-775 for Intel Core 2 Quad, Core 2 Duo, Core 2 Extreme processor
Socket-775 for Intel Pentium® D
8 Phase digital PWM
FSB
800/1066/1333 MHz
Memory
128-bit Dual-channel memory architecture
4 240-pin DIMM sockets max 8GB
Supports unbuffered, single/double-side DDRII 533/667/800 DIMMs
Supports x8/x16, non-ECC and up to 1Gb DDR devices
Expansion Slots
1 x16, 1 x4, 1 x1 Graphic Slots with Crossfire and Physical
1 PCI Express x1
3 PCI
Storage
1 Floppy port
1 parallel IDE ports with up to 133Mbps UltraDMA
8 serial SATAII ports with up to 3Gbs
Support INTEL SATAII with RAID 0/1/0+1/5
JMB 363 supports 2 SATAII ports and 1 IDE port with RAID 0/1
USB
12 USB 2.0 ports
Audio
Realtek ALC 885 for 8CH HD audio in Bernstein card
LAN
2 GbE LAN by Marvell 88E8052+8053 with teaming
IEEE 1394
VT6307 with 2 IEEE1394 ports
Legacy IO
IT8718F-S
Hardware Monitoring:
CPU/System temperature sensing w/ overheating alarm CPU
overheating protection during system boot-up
12v/5v/3.3v/Vcore/Vdimm/Vnb/Vbat/5Vsb voltages sensing
Current drive CPU temperature sensing
3 Fan speed sensing and 1 Linear fan speed control for CPU fan
Back panel IO port
1 x PS2 mouse, 1 x PS2 keyboard
2 USB 2.0 ports, 1 x IEEE-1394
2 USB 2.0 ports, 1 x RJ45
2 USB 2.0 ports, 1 x RJ45
Other onboard connectors
3 USB header for 6 USB 2.0 ports
1 2x5-pin header for IEEE-1394 port
1 2x6 connector for Bernstein audio module
1 5x2-pin for IRDA header
1 4x1-pin FAN connector for CPU, 2 3x1-pin FAN for Chipset, and 3 for Chassis
BIOS features
8 Mb flash ROM
CMOS Reloaded
ACPI; PnP; Hotkey flash; Wake on Ring/LAN/USB/Keyboard and Mouse
Manageability
DMI 2.0, WOL by PME; WOR by PME; PXE2 Boot
Accessories
User’s Manual, Quick Installation guide
1 Parallel IDE flat cable, 1 FDD flat cable
4 Serial IDE cables with SATA power cable
Driver CD
1 Floppy diskette for RAID JMicron 363 and INTEL
I/O shield
Motherboard Form Factor and PCB Size
ATX Form Factor Motherboard,305x245 mm, 6 Layers, PCB in Black
Author: Jake B. (Boise,ID) Performs beautifully. I wanted to see what my e6300 would do OCed. All i did was bump up the fsb to 429 giving me 3003MHz speed compared to 1860MHz stock. One thing i did not understand was that when i powered up the system it would start shut down for 3 seconds and powerup again to normal state. Called the pro's and they had me contact DFI. They said this is normal it is a built in power saving feature, so that took a load off. Great service and great product.Thanks guys.
P.S.-really wish i would of waited a couple more days to save 80 bucks i could of spent on something else.
Author: Jake B. (Boise,ID) Performs beautifully. I wanted to see what my e6300 would do OCed. All i did was bump up the fsb to 429 giving me 3003MHz speed compared to 1860MHz stock. One thing i did not understand was that when i powered up the system it would start shut down for 3 seconds and powerup again to normal state. Called the pro's and they had me contact DFI. They said this is normal it is a built in power saving feature, so that took a load off. Great service and great product.Thanks guys.
P.S.-really wish i would of waited a couple more days to save 80 bucks i could of spent on something else.