|
|
|
|
DFI LanParty PRO 875 Used Motherboard Socket 478 DDR400 SATA RAID AGP ATX
NO accessories Just THE Motherboard
Need a Cheap Motherboard? Upgrade your old PC Motherboard with this Used/Refurbished Socket 478 Motherboard. DFI LanParty PRO 875 NO accessories Just THE Motherboard. ATX Intel DFI Motherboard - Retail
Used/Refurbished Motherboard DFI LanParty PRO 875 Socket 478 Motherboard 4GB system memory DDR400,SATA RAID AGP Motherboard ATX Form Factor Motherboard Used/Refurbished-Retail - Retail MFG Part: LANPARTY PRO 875 Refurbished Socket 478 Motherboard
Ninjalane.com
Did a review on this motherboard back in 2003.
DFI LanParty Pro875 Motherboard Review
| Specification |
|---|
DFI LANPARTY PRO 875 Refurbished Socket 478 Motherboard |
| Model |
|---|
| LANPARTY PRO 875 Socket 478 Refurbished |
| Socket |
|---|
|
Socket 478 Motherboard |
| CPU |
|---|
Intel® Pentium® 4 Processor with Hyper-Threading Technology - 800MHz and 533MHz FSB
Intel® Pentium® 4 Northwood Processor - 533MHz and 400MHz FSB
Intel® Celeron® Northwood processor - 400MHz system data bus |
| Chipset |
|---|
|
Intel® 875P chipset - Intel® 82875P Memory Controller Hub (MCH) - Intel® 82801ER I/O Controller Hub (ICH5R) |
| Memory |
|---|
Supports dual channel (128-bit wide) memory interface - Each channel supports 2 DIMM sockets
Supports up to 4GB system memory
Supports Dynamic mode to optimize system performance
Synchronous operation with processor system bus - PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU (supports PAT mode). DDR333 will run at 320MHz memory frequency when used with 800MHz FSB CPU. - PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU - PC2100 (DDR266) with 400MHz FSB CPU
Supports ECC/non-ECC DIMMs
Supports unbuffered DIMMs |
| Expansion Slots |
|---|
1 AGP slot
5 PCI slots |
| BIOS |
|---|
Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible
Genie BIOS provides: - CPU/DRAM overclocking in 1MHz stepping - AGP/PCI/SATA overclocking - CPU/DIMM/AGP overvoltage
Flash EPROM for easy BIOS upgrades
4Mbit flash memory |
| Power Management |
|---|
Supports ACPI specification and OS Directed Power Management
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include: - Wake-On-Keyboard/Mouse - Wake-On-USB Keyboard - Wake-On-Ring (external modem) - Wake-On-LAN - RTC timer to power-on the system |
| Hardware Monitor |
|---|
Monitors CPU/system temperature and overheat alarm
Monitors CPU/1.5V/5VSB/VBAT/3.3V/5V/±12V voltages and failure alarm
Monitors CPU/chassis/second fan speed and failure alarm
Automatic chassis/second fans on/off control
Read back capability that displays temperature, voltage and fan speed
CPU Fan Protection function monitors the CPU fan during system boot-up
CPU Temperature Protection function monitors CPU temperature during system boot-up |
| AGP |
|---|
Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/sec.) for 3D graphics applications (AGP 2x and 3.3V AGP card are not supported)
Supports AGP 3.0 and AGP 2.0 spec. |
|
| Audio |
|---|
20-bit stereo full-duplex codec with independent variable sampling rate
High quality differential CD input
True stereo line level outputs
S/PDIF-in/out interface
6-channel audio output |
| CSA Gigabit LAN |
|---|
Uses 82547EI Gigabit LAN CSA interface
Integrated power management functions
Full duplex support at both 10, 100 and 1000 Mbps
Supports IEEE 802.3u auto-negotiation
Supports wire for management |
| ATA RAID |
|---|
Uses HighPoint 372N RAID controller
RAID 0, 1, 0+1 and 1.5
Two independent IDE channels support 4 hard disk drives (ATA/33, ATA/66, ATA/100, ATA/133 or EIDE)
Supports PIO modes 0/1/2/3/4, DMA modes 0/1/2 and UDMA modes 0/1/2/3/4/5/6 |
| IDE |
|---|
Supports ATA/33, ATA/66 and ATA/100 hard drives
PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
Bus mastering reduces CPU utilization during disk transfer
Supports ATAPI CD-ROM, LS-120 and ZIP |
| ICH5R Serial ATA with RAID |
|---|
Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface)
Supports RAID 0 |
| Rear Panel I/O Ports |
|---|
4 USB 2.0/1.1 ports
1 RJ45 LAN port
2 DB-9 serial ports
1 DB-25 parallel port
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
3 audio jacks: line-out, line-in and mic-in |
| I/O Connectors |
|---|
2 connectors for 4 additional external USB 2.0/1.1 ports
1 front audio connector for external line-out and mic-in jacks
1 connector for an external game/MIDI port
2 internal audio connectors (CD-in and AUX-in)
1 4-channel audio output connector
1 S/PDIF-in/out connector
1 connector for IrDA interface
2 RAID IDE connectors
2 Serial ATA connectors
2 IDE connectors
1 floppy connector
2 ATX power supply connectors
1 Wake-On-LAN connector
3 fan connectors for CPU fan, chassis fan and second fan |
| Compatibility |
|---|
PCI 2.2 and AC ’97 compliant
Intel AGP version 3.0 |
| PCB |
|---|
4 layers, ATX form factor
30.5cm (12.05") x 24.4cm (9.6") |
| Warranty |
|---|
DFI LanParty PRO 875
| 15 days MotherboardPro Warranty
DFI 30 DAY Warranty
LanParty PRO 875 DFI Product Page
DFI Technical Support
Support Phone Number: 1-510-226-7500 EX 117
Motherboard Warranty Information |
| Socket 478 Motherboard |
|
DFI Motherboard NO accessories Just THE Motherboard Used Motherboard DFI LanParty PRO 875 Socket 478 Motherboard 4GB system memory DDR400,SATA RAID AGP Motherboard ATX Form Factor Motherboard Used/Refurbished-Retail - Retail MFG Part: LANPARTY PRO 875
Need a Cheap Motherboard? Upgrade your old PC Motherboard with this Used/Refurbished Socket 478 Motherboard. DFI LanParty PRO 875 NO accessories Just THE Motherboard. ATX Intel DFI Motherboard - Retail
 |
More Bestselling Motherboards |
 |
|
 |
|
Help us we need your Pre-Sales Questions or Review/Comments |
|
|
|
|
|
Voting |
|
|
|
|
|
|
There have been no forum post or reviews for this product. |
Post your Pre-Sales Questions or Review/Comments about the product here: |
|
|
|
The best Gifts for a Computer Geek |
|
|
|
Motherboard Pro - Your Source for Motherboards
|
